Ultra High Molecular Weight Polyethylene Sheet
Ultra high molecular weight polyethylene sheet is made from 5 million molecular weight polyethylene raw materials and molded under high temperature and pressure for a long time. Its hardness, high wear resistance, and impact resistance all meet national standards. It is the preferred choice for processing wear-resistant parts, and various wear-resistant and corrosion-resistant parts can be customized according to the drawings.
It combines the superior properties of most plastics, including impact resistance, low temperature resistance, wear resistance, chemical corrosion resistance, self lubrication, and absorption of impact energy. In recent years, this new type of plastic product has been widely used in European and American countries, and the demand is increasing.
|
Serial Number
|
Entry name
|
Unit
|
Test method
|
Index
|
1
|
Molecular weight (viscosity method)
|
×10
|
Refer to GB1841-80ASTMD4020-81
|
200-900
|
2
|
Impact Strength
|
KJ/m2
|
GB/T1043.1-2008
|
≥130
|
3
|
Bending strength
|
MPa
|
GB/T9341-2008
|
≥30
|
4
|
Compressive strength
|
MPa
|
GB/T1041-2008
|
≥35
|
5
|
ball indentation hardness
|
N/mm2
|
GB/T3398.1-2008
|
≥40
|
6
|
Bensity
|
g/cm3
|
GB/T1033.1-2008
|
0.96-1
|
7
|
Frictional coefficient
|
|
GB/T3960-2008
|
0.11-0.19
|
8
|
Water absorption rate
|
%
|
GB/T1034-2008
|
≤0.01
|
|
![Tensile Strength Ultra High Molecular Weight Polyethylene Polymer UHMWPE Plates Board Sheet for Industry Equipment](//www.micstatic.com/athena/img/transparent.png)
Feature:
1. High wear resistance: Among all current engineering plastics, UHMW-PE has the best wear resistance.
2. Corrosion resistance
3. Extremely low friction coefficient: With a static friction coefficient of 0.07 and good self-lubricating properties, it is an ideal material for bearings, shaft sleeves, sliders, and lining. In addition to improving wear resistance life, it can also achieve energy-saving effects.
4. Impact resistance: Its impact strength is 10 times that of nylon 66, 20 times that of polyvinyl chloride, and 8 times that of polytetrafluoroethylene; Especially in low-temperature environments, its impact strength reaches its highest value, and its flexibility provides an extremely safe and reliable guarantee for the conveying system.
5. Aging resistance: Stable performance, good aging resistance, both ground and underground, no aging for 50 years.
6. Electrical performance: High volume resistance, breakdown voltage of 50KV/mm, dielectric constant of 2.3. Suitable as a structural material for electrical engineering over a wide temperature and frequency range.
7. Hygienic and non-toxic: UHMW-PE is odorless, non-toxic, and odorless. It is non corrosive and has physiological inertness and adaptability.
8. Sound resistance: The processed ultra-high molecular weight polyethylene sheet has good sound resistance. Has adsorption and damping effects on sound.
![Tensile Strength Ultra High Molecular Weight Polyethylene Polymer UHMWPE Plates Board Sheet for Industry Equipment](//www.micstatic.com/athena/img/transparent.png)
![Tensile Strength Ultra High Molecular Weight Polyethylene Polymer UHMWPE Plates Board Sheet for Industry Equipment](//www.micstatic.com/athena/img/transparent.png)
Abrasion resistance - UHMWPE pipes have excellent abrasion resistance providing long life in abrasive slurry applications.
Chemical resistance - outstanding resistance to a wide range of chemical reagents allows the use of UHMWPE systems in tailings pipelines and chemical treatment applications used in mining operations.
Flexibility - UHMWPE pipes can be bent to a minimum of 30 times the pipe's outside diameter for HDPE. This flexibility and resiliency allows the pipe to absorb surge pressures, vibration and stresses caused by soil movement. This makes the pipes particularly useful in submarine pipe lines, mine subsidence and earthquake prone areas.
High flow capacity - low friction compared with materials such as fibre reinforced cement and resistance to material deposit buildup give UHMWPE pipes long lived high flow capacity.
Lower pumping cost due to greater hydraulic capacity as compared with steel and HDPE pipes.
Ease of installation - UHMWPE is easy to install with light weights and flanged couplings.
Application industry:
1. In industries such as metallurgy, electricity, coal mining, shipbuilding, and meat industry, the main products are lining
boards and strips for coal silos and various hopper chutes, which utilize the impact resistance, wear resistance, non adhesion, and self-lubricating properties of ultra-high molecular weight polyethylene sheets.
2. In the papermaking industry, the wear resistance of ultra-high molecular weight polyethylene sheets is mainly utilized, and the main products are vacuum suction tank panels and scraper boards.
3. In the textile industry, the impact resistance and wear resistance of ultra-high molecular weight polyethylene sheets are
mainly utilized. The main products include various knots, gears, cotton rolls, cuttings, etc.
4. In the mechanical industry, the wear resistance, impact resistance, and self-lubricating properties of ultra-high molecular weight polyethylene sheets are mainly utilized. The main products include various sliders, wear-resistant bars, shaft sleeves, various pins, gears, camshafts, impellers, etc.
![Tensile Strength Ultra High Molecular Weight Polyethylene Polymer UHMWPE Plates Board Sheet for Industry Equipment](//www.micstatic.com/athena/img/transparent.png)
PE Film Wrapping and Wooden Pallet
![Tensile Strength Ultra High Molecular Weight Polyethylene Polymer UHMWPE Plates Board Sheet for Industry Equipment](//www.micstatic.com/athena/img/transparent.png)
Shanxi Huazhan Wear-resistant Material Technology Co., Ltd. is located in Gudan Industrial Park, Taiyuan City, Shanxi Province. Covering an area of 25,000 square meters, there are more than 80 engineering and technical personnel.
In the past 20 years, we have been committed to the customization, production and service of wear-resistant steel products, professionally providing solutions for wear-resistant products in industries such as electric power, metallurgy, mining, steel mills, petrochemicals, and new energy. A major breakthrough has been made; advanced production technology has been introduced, the monthly output of wear-resistant pipes is 1,300 tons, and advanced testing equipment is equipped. Our products involve more than 110 varieties in 12 categories, and we are currently the largest manufacturer of wear-resistant pipe fittings in China.
The company has an independent research and development design team, 70% of the front-line employees have 10 years of casting experience, the products have passed the ISO9001 quality system certification, and have a number of invention patents.
Huazhan has always pursued the enterprise management policy of "quality first, reputation first", strictly controlled quality, and formed a strict quality control mechanism and a reliable quality assurance operation system. Because of reliable product quality, honest business philosophy, and scientific technical effects, it has won the trust of users, and the scale of the enterprise is developing rapidly. The products are sold to engineering projects in 31 regions across the country, and are widely used in mines, power generation, chemicals, etc. project.
Why Choose Us:
1.One-Stop EPR Contracting Service
From design to delivery, worry-free throughout the entire process.
2.Efficient Sorting System Design
With just an idea or a drawing, we can complete the system diagram and flowchart.
3.Free Technical Consultation
Providing cutting-edge industry technology, allowing customers to enjoy top-notch services for free.
4.Dedicated Technical Team
Each project is equipped with a dedicated team to ensure professional support.
5.Strict Quality Control and After-Sales Service
High-standard quality control with a 3-month product warranty for peace of mind.
Trust Huazhan For Excellence!
1. Do you accept small orders?
A: Don't worry. Please feel free to contact us. In order to get more orders, including
customized drop shipping, we accept small orders.
2. What are your processing equipment?
A: CNC machining center, CNC lathe, milling machine, engraving machine, molding machine.
3. When can I get the quotation?
A: We will usually quote you within 24 hours after receiving your inquiry. If you are very anxious to get a quote, please call us or tell us in your email so that we can give priority to your inquiry.
4. Can you do OEM for me?
A: We accept all OEM orders, just contact us and give me your design. We will provide you with a
reasonable price and make samples for you as soon as possible.
5: What are your payment terms?
A: Through T/T, LC AT SIGHT, 30% advance payment, 70% balance before shipment.