Industry Mineral Gravity Separator Hydrocyclone Hydro Cyclone Filter for Gold Mininig

Product Description

FX Series Ceramic Patch Lined Hydrocyclone

Product Description

The basic principle of the FX series cyclone is to separate the liquid-liquid, liquid-solid, liquid-gas and other two-phase or multi-phase mixtures with a certain density difference under the action of centrifugal force, and the mixed liquid enters the cyclone tangentially under a certain pressure. The flow device produces a high-speed rotating flow field in the cylindrical cavity, and the components with high density in the mixture move downward in the axial direction and outward in the radial direction under the action. The segment of the vertebral body moves downward along the wall of the vessel and is discharged from the bottom flow port, thus forming an external vortex flow field, the components with low density move toward the central axis, and form an upward moving internal vortex at the center of the axis, and then It is discharged from the overflow port, so that the purpose of two-phase separation is achieved.

Specification	Diameter(mm)	Feed pressure(MPa)	Processing power(m³/h)	Separation size(μm)
FX710	710	0.04-0.15	350-500	74-250
FX660	660	0.04-0.15	250-360	74-250
FX610	610	0.04-0.15	200-300	74-200
FX500	500	0.04-0.2	140-240	74-200
FX400	400	0.06-0.2	100-170	74-150
FX350	350	0.06-0.2	70-150	50-150
FX300	300	0.06-0.2	45-90	50-150
FX250	250	0.06-0.3	40-80	40-100
FX200	200	0.06-0.3	25-40	40-100
FX150	150	0.08-0.3	15-30	20-74
FX100	100	0.1-0.3	8-15	20-50
FX75	75	0.1-0.4	5-8	10-40

Packing & Delivery

Packing: Non-fumigation plywood case or as required by customer.
Shipping: Sea Freight/Air Freight/Land Transportation.

Application

It is widely used in the recovery of coarse coal slime in various coal washing plants and the pre-concentration of pulp before flotation, the pre-graded concentration of coarse coal slime before separation, the pre-graded concentration of coarse coal slime before dehydration, and the separation and coarse treatment of flotation feed slime water. Large concentration ratio, high underflow concentration, easy to combine with TBS, curved screen, high frequency screen and other dehydration equipment.

Projects

Related Products

Introduction of microcrystalline wear-resistant ceramic linings
1. The microcrystalline alumina wear-resistant lining and lining are special wear-resistant ceramics formed by dry pressing and calcined at 1500-1700 ºC. Its Rockwell hardness is HRA80-90, which is only as hard as diamond;
2 The product has the characteristics of special wear resistance, impact resistance and convenient construction. Its theoretical wear resistance is equivalent to 260 times that of manganese steel and 170 times that of chrome steel. According to the actual application calculation, it can effectively extend the service life of the easily worn parts of the equipment by more than 10 times;
3 Application areas: It is mainly used on the inner and outer surfaces of material conveying pipelines and related wear-resistant equipment in coal washing, iron and steel plants, thermal power, chemical environmental protection, cement and other industries.
Microcrystalline wear-resistant ceramic lining, lining technical parameters

Model	Specifications (liner/porcelain)
Alumina content	≥95%
Density	≥3.6 g/cm3
Rockwell hardness	≥85 HRA
Compressive strength	≥850 MPa
Fracture toughness KIC	≥4.8MPa m1/2
Bending strength	≥290MPa
Wear resistance	≤0.0002g (p=76N n=800 rpm t=30 minutes)
Ceramic sheet thickness	1.5-25mm

Company Profile