Highly Recognized Heavy Medium Dense Media Ceramic Separator Cyclone for Coal Density Separation

• Customization: Available
• Type: Flotation Separator
• Voltage: 220V
• Model NO.: Triple product heavy media cyclone
• Weight: <1T
• Material: Carbon Steel
• Material Feature: Oil Resistant
• Certification: ISO9001:2008, ISO9001:2000, CE
• Energy Saving: Energy Saving
• Warranty: 1 Year
• Color: Blue
• Customized: Customized
• Condition: New
• Name: Three-Product Heavy Medium Cyclone
• Trademark: Huazhan
• Origin: Shanxi
• Production Capacity: 5000ton/Year

Product Description

 

3-product heavy dielectric hydrocyclone

Product Description

Equipment description:

Dense medium cyclones are divided into two categories: pressure-feeding and non-pressing-feeding,but their separation principles are basically the same.

The dense medium suspension and minerals are subjected to centrifugal force in the cyclone, so that the suspension is stratified according to density, and the minerals in the suspension achieve the separation effect according to different densities.

The high density heavy products are concentrated on the outer wall, and are discharged through the heavy product discharge port along the outer spiral movement; the low-density light products are discharged through the overflow port in the negative pressure area at the center of the cyclone along the inner spiral, thus achieving high efficiency and accuracy sorting.

 

Operational principle:

The selected raw coal is fed from the top central pipe of the first-stage cylindrical cyclone.

Qualified resuspension liquid is fed tangentially from the lower part of the cyclone after being pressurized by the medium pump.

The selected material is under the action of centrifugal force field and density field

-The light product is discharged from the central tube at the lower end of the cyclone through the internal swirl flow along with a part of the heavy suspension with a lower density, and becomes clean coal;

-The heavy product and part of the heavy-suspension liquid with higher density pass through the external cyclone upward along the inner wall of the cyclone, and enter the second section of cylindrical conical cyclone;

-The materials entering the second section of the cylinder are sorted, and the medium coal and gangue are discharged.

 

Pressure has three product heavy medium hydrocyclone
Dimensions	Feed particle size/mm	Feed pressure/MPa	processing power/(t/h)	throughput/(m^3/h)
YTMC500/350	≤20	0.06~0.10	35~60	180~250
YTMC600/400	≤30	0.08~0.12	50~90	250~370
YTMC710/500	≤35	0.09~0.14	90~130	370~540
YTMC780/550	≤40	0.10~0.15	110~160	540~660
YTMC850/600	≤45	0.13~0.16	120~180	650~750
YTMC900/650	≤50	0.15~0.18	160~200	740~840
YTMC1000/710	≤55	0.18~0.22	200~250	840~1050
YTMC1100/780	≤60	0.20~0.24	240~280	1050~1250
YTMC1200/850	≤70	0.22~0.28	300~380	1250~1600
YTMC1300/920	≤80	0.26~0.32	350~450	1600~1900
YTMC1400/1000	≤90	0.30~0.40	450~550	1900~2300

 

Unpressure three product heavy dielectric cyclone
Dimensions	Feed particle size/mm	Feed pressure/MPa	processing power/(t/h)	Media circulation/(m^3/h)
WTMC500/350	≤20	0.05~0.08	35~50	140~180
WTMC600/400	≤30	0.06~0.10	50~80	180~300
WTMC710/500	≤35	0.08~0.12	80~120	300~420
WTMC780/550	≤40	0.09~0.13	100~150	420~540
WTMC850/600	≤45	0.10~0.14	120~180	480~620
WTMC900/650	≤50	0.12~0.16	140~200	560~700
WTMC1000/710	≤55	0.15~0.18	180~230	700~800
WTMC1100/780	≤60	0.18~0.22	220~280	800~1100
WTMC1200/850	≤70	0.20~0.28	260~350	1100~1400
WTMC1300/920	≤80	0.22~0.30	320~400	1400~1600
WTMC1400/1000	≤90	0.28~0.38	400~500	1600~2000
WTMC1500/1100	≤100	0.30~0.40	500~600	2000~2400

Related Products

Introduction of microcrystalline wear-resistant ceramic linings
1. The microcrystalline alumina wear-resistant lining and lining are special wear-resistant ceramics formed by dry pressing and calcined at 1500-1700 ºC. Its Rockwell hardness is HRA80-90, which is only as hard as diamond;
2 The product has the characteristics of special wear resistance, impact resistance and convenient construction. Its theoretical wear resistance is equivalent to 260 times that of manganese steel and 170 times that of chrome steel. According to the actual application calculation, it can effectively extend the service life of the easily worn parts of the equipment by more than 10 times;
3 Application areas: It is mainly used on the inner and outer surfaces of material conveying pipelines and related wear-resistant equipment in coal washing, iron and steel plants, thermal power, chemical environmental protection, cement and other industries.
Microcrystalline wear-resistant ceramic lining, lining technical parameters

Model	Specifications (liner/porcelain)
Alumina content	≥95%
Density	≥3.6 g/cm3
Rockwell hardness	≥85 HRA
Compressive strength	≥850 MPa
Fracture toughness KIC	≥4.8MPa m1/2
Bending strength	≥290MPa
Wear resistance	≤0.0002g (p=76N n=800 rpm t=30 minutes)
Ceramic sheet thickness	1.5-25mm

FACTORY TOUR

Shanxi Huazhan Wear-resistant Material Technology Co., Ltd. is located in Gudan Industrial Park, Taiyuan City, Shanxi Province. Covering an area of 25,000 square meters, there are more than 80 engineering and technical personnel.

 

In the past 20 years, we have been committed to the customization, production and service of wear-resistant steel products, professionally providing solutions for wear-resistant products in industries such as electric power, metallurgy, mining, steel mills, petrochemicals, and new energy. A major breakthrough has been made; advanced production technology has been introduced, the monthly output of wear-resistant pipes is 1,300 tons, and advanced testing equipment is equipped. Our products involve more than 110 varieties in 12 categories, and we are currently the largest manufacturer of wear-resistant pipe fittings in China.

The company has an independent research and development design team, 70% of the front-line employees have 10 years of casting experience, the products have passed the ISO9001 quality system certification, and have a number of invention patents.

 

Huazhan has always pursued the enterprise management policy of "quality first, reputation first", strictly controlled quality, and formed a strict quality control mechanism and a reliable quality assurance operation system. Because of reliable product quality, honest business philosophy, and scientific technical effects, it has won the trust of users, and the scale of the enterprise is developing rapidly. The products are sold to engineering projects in 31 regions across the country, and are widely used in mines, power generation, chemicals, etc. project.

Certification:

Why Choose Us:
1.One-Stop EPR Contracting Service
From design to delivery, worry-free throughout the entire process.

2.Efficient Sorting System Design
With just an idea or a drawing, we can complete the system diagram and flowchart.

3.Free Technical Consultation
Providing cutting-edge industry technology, allowing customers to enjoy top-notch services for free.

4.Dedicated Technical Team
Each project is equipped with a dedicated team to ensure professional support.

5.Strict Quality Control and After-Sales Service
High-standard quality control with a 3-month product warranty for peace of mind.

Trust Huazhan For Excellence!