| Customization: | Available |
|---|---|
| Standard: | GB |
| Application: | Loader, Construction Machinery, Metallurgical Machinery, Cement Plant, Mining Machine, Thermal Power Plant, Coal Yard |
|
Still deciding? Get samples of US$ 0.95/Meter
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Technical indicators | performance parameter | ||
| HCHNMPE | ASTM Test method | ||
| physical property | density(g/cm3) | 0.935 | D1505 |
| physical property | melting point(ºC) | 136 | D2117 |
| Thermal deformation temperature(ºC) | 85 | D648 | |
| Coefficient of linear expansion(10-4ºC-1) | 1.5~2.5 | D696 | |
| Thermal conductivity(W/(m·k) | 8.5 | D177 | |
| Volume resistivity( Ω·cm) | 10 | D257 | |
| breakdown voltage(KV/mm) | 50 | D149 | |
| Dielectric constant | 2.3 | D150 | |
| mechanical property | Breaking strength(Mpa) | 40~45 | D638 |
| Elongation at break(%) | 300~400 | D638 | |
| Bending modulus(Mpa) | 600 | D747 | |
| Rockwell hardness(HRM) | 40~60 | D747 | |
| Other performance | Wear amount(mg/1000times) | 70 | D1175 |
| Pipe material | wall | HCHNMPE | |
| Outer wall | Q235steel pipe | ||
| Processing technology | Reduced liner | ||
| Acid resistance(1:9HC1) | It can resist various corrosive media and organic solvents within a certain temperature and concentration range | ||
| Alkali resistance(10%NaOH) | |||
| Oil resistance | |||
| Water resistance(%) | <0.01 | ||
| Maximum abrasion impact strength(KJ/m2) | >140 | D250 | |
| Allowable hydraulic pressure | 1.6Mpa | ||
| Parameters of wear-resistant plastic composite alloy pipe | |||
| Serial No | Specification steel pipe | Specification superelevation | Pressure MPa |
| 1 | 127*5 | 110*8 | 3.0 |
| 2 | 146*5 | 1.30E+10 | 3.0 |
| 3 | 168*5 | 150*8 | 3.0 |
| 4 | 180*5 | 159*9 | 3.0 |
| 5 | 219*5 | 205*9 | 3.0 |
| 6 | 245*6 | 220*10 | 2.0 |
| 7 | 273*7 | 250*10 | 2.0 |
| 8 | 299*7 | 273*10 | 2.0 |
| 9 | 351*7 | 325*12 | 2.0 |
| 10 | 402*7 | 377*12 | 2.0 |
| 11 | 426*7 | 400*12 | 2.0 |
| 12 | 450*8 | 426*14 | 1.6 |
| 13 | 530*8 | 500*13 | 1.6 |
| 14 | 630*8 | 600*16 | 1.6 |
The production of wear-resistant plastic alloy composite pipe mainly goes through the following processes:
First, the production of outer wall steel pipe: the production of outer wall steel pipe shall go through blanking, welding, rust removal and other processes, and can enter the next process only after passing the inspection;
Second, the production of lined plastic alloy steel pipes: the production of lined plastic alloy pipes will go through a series of processes such as batching, processing, granulation, feeding, mixing, extrusion, vacuum shaping, spray cooling, traction cutting, etc. to produce plastic alloy pipes. After passing the inspection, the next process can be started;
Third, the outer wall steel pipes and wear-resistant plastic alloy pipes that have passed the acceptance are now formed into plastic alloy composite wear-resistant pipes through reducing lining pipes, flanging and other processes. The plastic alloy pipe is closely combined with the outer wall steel pipe, and then subjected to anti-corrosion treatment and painting. Plastic alloy composite pipes can only be packaged and delivered after passing the acceptance.
The wear-resistant plastic alloy composite pipe is based on the wear-resistant plastic alloy as the inner lining, supplemented by reinforced steel pipes. This product combines the wear-resistant, corrosion-resistant and aging resistance of the inner lining and the high strength and toughness of the outer layer. It is suitable for working conditions with severe wear and corrosion.
| Steel pipe blanking | → | welding | → | rust removal | → | Qualified inspection | → | |||||||
| Granulation | → | Feeding | → | Extrusion | → | Vacuum shaping | → | Spray cooling | → | Traction cutting | → | Qualified inspection | → | |
| Delivery | ← | packaging | ← | inspection | ← | anti-corrosion treatment | ← | reducing liner | ← |
1. High wear resistance
The wear resistance of HCHNMPE wear-resistant plastic alloy ranks first among the existing plastics. The mortar wear test proves that it is 4 times more wear-resistant than nylon, and several times more wear-resistant than carbon steel, brass and other metals. Its service life is significantly improved.
2. High impact resistance
The impact strength of HCHNMPE wear-resistant plastic alloy ranks first among the existing plastics, and it is difficult to crack it whether it is subjected to external strong impact or internal pressure fluctuation. The impact strength is quite high even at - 70 ºC. Its flexibility provides a safe and reliable guarantee for the conveying system.
3. Aging resistance
The main factors affecting weather resistance are the type, number and relative molecular weight of unsaturated genes in the molecular chain. The less unsaturated genes in the molecular chain, especially trans hypovinylidene and vinylidene, the greater the relative molecular weight, the better the weather resistance. Hchnmpe has stable properties, strong weather resistance and good aging resistance. The weather resistance under natural storage is 50 years (the performance will decrease by 10% after 50 years).
4. Corrosion resistance
HCHNMPE is a saturated molecular group structure with high chemical stability. It can resist various corrosive media and organic solvents within a certain temperature and concentration range. Therefore, it is unnecessary to apply anti-corrosion coatings during construction.
5. Self lubrication
HCHNMPE wear-resistant plastic alloy has low surface adsorption, good self lubrication and non adhesion, small friction coefficient, small flow resistance, and can save energy by more than 30%. The flow of HCHPE plastic alloy is 30% larger than that of steel pipe, so you can choose plastic alloy pipe with smaller diameter under the same flow conditions.
6, High pressure bearing
HCHNMPE wear-resistant plastic alloy composite pipe can withstand high pressure, up to 25Mpa.
7, Convenient connection
HCHNMPE wear-resistant plastic alloy composite pipe is generally connected by flange, and can be connected by quick coupling according to design requirements.
Shanxi Huazhan Wear-resistant Material Technology Co., Ltd. is located in Gudan Industrial Park, Taiyuan City, Shanxi Province. Covering an area of 25,000 square meters, there are more than 30 engineers and technicians. In the past 20 years, we have been committed to the customization, production and service of wear-resistant and heat-resistant steel products, specializing in providing solutions for wear-resistant and heat-resistant products in power, metallurgy, mining, steel mills, petrochemical, new energy and other industries. A major breakthrough has been made in core technologies such as Wen: the introduction of advanced production technology, a monthly production of 300 tons of wear-resistant pipes, and advanced testing equipment. Our products involve more than 110 varieties in 12 categories and are currently the largest manufacturer of wear-resistant pipe fittings in China.
The company has an independent R&D and design team, 70% of the front-line employees have 10 years of casting experience, the products have passed the Is09001 quality system certification, and have a number of invention patents. The company has always pursued the "quality first, reputation first" business policy, strict quality management, and formed a strict quality restraint mechanism and a reliable quality assurance operation system. Because of reliable product quality, honest business philosophy, and scientific and technological effects, it has won the trust of users, and the scale of the enterprise is developing rapidly. project.
1. What is your mode of transportation?
Answer: Shipping, shipping
2. Why is your price higher than others?
Answer: Because the quality of the products must be guaranteed, the raw materials we use are all of high quality and strictly controlled. We cannot achieve the lowest price, but we will ensure that the quality is passed. So there will be differences in prices. The quality of raw materials differs greatly in price.
3. Can it be made in strict accordance with the caliber, specification and length provided by me?
Answer: General conventional products are implemented according to standard specifications, and non-conventional products can be customized.
4. I have a large demand, can I offer a discount?
Answer: Yes, depending on your specific needs, large quantities can be discounted.
){kind=link}