Customizable Pressureless Three-Product Heavy Medium Hydrocyclone Cyclone for Raw Coal Sorting

Product Description

3-product heavy dielectric hydrocyclone

Product Description

Equipment description:

Dense medium cyclones are divided into two categories: pressure-feeding and non-pressing-feeding,but their separation principles are basically the same. The dense medium suspension and minerals are subjected to centrifugal force in the cyclone, so that the suspension is stratified according to density, and the minerals in the suspension achieve the separation effect according to different densities. The high density heavy products are concentrated on the outer wall, and are discharged through the heavy product discharge port along the outer spiral movement; the low-density light products are discharged through the overflow port in the negative pressure area at the center of the cyclone along the inner spiral, thus achieving high efficiency and accuracy sorting.

Operational principle:

The selected raw coal is fed from the top central pipe of the first-stage cylindrical cyclone.
Qualified resuspension liquid is fed tangentially from the lower part of the cyclone after being pressurized by the medium pump.
The selected material is under the action of centrifugal force field and density field
-The light product is discharged from the central tube at the lower end of the cyclone through the internal swirl flow along with a part of the heavy suspension with a lower density, and becomes clean coal;
-The heavy product and part of the heavy-suspension liquid with higher density pass through the external cyclone upward along the inner wall of the cyclone, and enter the second section of cylindrical conical cyclone;
-The materials entering the second section of the cylinder are sorted, and the medium coal and gangue are discharged.

Unpressure three product heavy dielectric cyclone
Dimensions	File particle size/mm	Feed pressure/MPa	processing power/(t/h)	Medium cycle volume/(m3/h)
WTMC500/350	≤20	0.05-0.08	35-50	140-180
WTMC600/400	≤30	0.06-0.10	50-80	180-300
WTMC710/500	≤35	0.08-0.12	80-120	300-420
WTMC780/550	≤40	0.09-0.13	100-150	420-540
WTMC850/600	≤45	0.10-0.14	120-180	480-620
WTMC900/650	≤50	0.12-0.16	140-200	560-700
WTMC1000/710	≤55	0.15-0.18	180-230	700-800
WTMC1100/780	≤60	0.18-0.22	220-280	800-1100
WTMC1200/850	≤70	0.20-0.28	260-350	1100-1400
WTMC1300/920	≤80	0.22-0.30	320-400	1400-1600
WTMC1400/1000	≤90	0.28-0.38	400-500	1600-2000
WTMC1500/1100	≤100	0.30-0.40	500-600	2000-2400

Pressure has three product heavy medium hydrocyclone
Dimensions	File particle size/mm	Feed pressure/MPa	processing power/(t/h)	Medium cycle volume/(m3/h)
YTMC500/350	≤20	0.06-0.10	35-60	180-250
YTMC600/400	≤30	0.08-0.12	50-90	250-370
YTMC710/500	≤35	0.09-0.14	90-130	370-540
YTMC780/550	≤40	0.10-0.15	110-160	540-660
YTMC850/600	≤45	0.13-0.16	120-180	650-750
YTMC900/650	≤50	0.15-0.18	160-200	740-840
YTMC1000/710	≤55	0.18-0.22	200-250	840-1050
YTMC1100/780	≤60	0.20-0.24	240-280	1050-1250
YTMC1200/850	≤70	0.22-0.28	300-380	1250-1600
YTMC1300/920	≤80	0.26-0.32	350-450	1600-1900
YTMC1400/1000	≤90	0.30-0.40	450-550	1900-2300

Packing & Delivery

Packing: Non-fumigation plywood case or as required by customer.
Shipping: Sea Freight/Air Freight/Land Transportation.

Application

It is widely used in the recovery of coarse coal slime in various coal washing plants and the pre-concentration of pulp before flotation, the pre-graded concentration of coarse coal slime before separation, the pre-graded concentration of coarse coal slime before dehydration, and the separation and coarse treatment of flotation feed slime water. Large concentration ratio, high underflow concentration, easy to combine with TBS, curved screen, high frequency screen and other dehydration equipment.

Projects

Related Products

Introduction of microcrystalline wear-resistant ceramic linings
1. The microcrystalline alumina wear-resistant lining and lining are special wear-resistant ceramics formed by dry pressing and calcined at 1500-1700 ºC. Its Rockwell hardness is HRA80-90, which is only as hard as diamond;
2 The product has the characteristics of special wear resistance, impact resistance and convenient construction. Its theoretical wear resistance is equivalent to 260 times that of manganese steel and 170 times that of chrome steel. According to the actual application calculation, it can effectively extend the service life of the easily worn parts of the equipment by more than 10 times;
3 Application areas: It is mainly used on the inner and outer surfaces of material conveying pipelines and related wear-resistant equipment in coal washing, iron and steel plants, thermal power, chemical environmental protection, cement and other industries.
Microcrystalline wear-resistant ceramic lining, lining technical parameters

Model	Specifications (liner/porcelain)
Alumina content	≥95%
Density	≥3.6 g/cm3
Rockwell hardness	≥85 HRA
Compressive strength	≥850 MPa
Fracture toughness KIC	≥4.8MPa m1/2
Bending strength	≥290MPa
Wear resistance	≤0.0002g (p=76N n=800 rpm t=30 minutes)
Ceramic sheet thickness	1.5-25mm

Company Profile